Forwarder setup

Configuration of common resolver softwares to forward DNS queries for .dn42 (and reverse DNS) IPv4 and IPv6 anycast services.

BIND

If you already run a local DNS server, you can tell it to query the dn42 anycast servers for the relevant domains by adding the following to /etc/bind/named.conf.local

zone "dn42" {
  type forward;
  forwarders { 172.20.0.53; fd42:d42:d42:54::1; };
};
zone "20.172.in-addr.arpa" {
  type forward;
  forwarders { 172.20.0.53; fd42:d42:d42:54::1; };
};
zone "22.172.in-addr.arpa" {
  type forward;
  forwarders { 172.20.0.53; fd42:d42:d42:54::1; };
};
zone "23.172.in-addr.arpa" {
  type forward;
  forwarders { 172.20.0.53; fd42:d42:d42:54::1; };
};

Note: With DNSSEC enabled, bind might refuse to accept query results from the dn42 zone: validating dn42/SOA: got insecure response; parent indicates it should be secure.

dnsmasq

If you are running dnsmasq under openwrt, you just have to add

config dnsmasq
        option boguspriv '0'
        option rebind_protection '1'
        list rebind_domain 'dn42'
        list server '/dn42/172.20.0.53'
        list server '/20.172.in-addr.arpa/172.20.0.53'
        list server '/22.172.in-addr.arpa/172.20.0.53'
        list server '/23.172.in-addr.arpa/172.20.0.53'

to /etc/config/dhcp and run /etc/init.d/dnsmasq restart. After that you are able to resolve .dn42 with the anycast DNS-Server, while your normal requests go to your standard DNS-resolver.

Attention: If you go with the default config you'll have to disable "boguspriv" in the first dnsmasq config section.

For normal dnsmasq use

server=/dn42/172.20.0.53
server=/20.172.in-addr.arpa/172.20.0.53
server=/22.172.in-addr.arpa/172.20.0.53
server=/23.172.in-addr.arpa/172.20.0.53

in dnsmasq.conf.

PowerDNS recursor

Add this to /etc/powerdns/recursor.conf (at least in Debian and CentOS), the forward-zone-recurse is one line.

dont-query=127.0.0.0/8, 10.0.0.0/8, 192.168.0.0/16, ::1/128, fe80::/10
forward-zones-recurse=dn42=172.20.0.53,hack=172.20.0.53,ffhh=172.20.0.53,ffac=172.20.0.53,020=172.20.0.53,adm=172.20.0.53,ffa=172.20.0.53,ffhb=172.20.0.53,ffc=172.20.0.53,ffda=172.20.0.53,ffdh=172.20.0.53,ff3l=172.20.0.53,fffl=172.20.0.53,ffffm=172.20.0.53,fffr=172.20.0.53,fffd=172.20.0.53,ffgl=172.20.0.53,fflln=172.20.0.53,ffbcd=172.20.0.53,ffbgl=172.20.0.53,ffgoe=172.20.0.53,ffgt=172.20.0.53,ffh=172.20.0.53,helgo=172.20.0.53,ffhef=172.20.0.53,ffj=172.20.0.53,ffka=172.20.0.53,ffki=172.20.0.53,ffhl=172.20.0.53,fflux=172.20.0.53,ffms=172.20.0.53,mueritz=172.20.0.53,ffnord=172.20.0.53,ffnw=172.20.0.53,ffoh=172.20.0.53,ffpb=172.20.0.53,ffpi=172.20.0.53,ffrade=172.20.0.53,ffrgb=172.20.0.53,ffrg=172.20.0.53,rzl=172.20.0.53,ffsaar=172.20.0.53,fftr=172.20.0.53,fftdf=172.20.0.53,ffwk=172.20.0.53,ffgro=172.20.0.53,ffwk=172.20.0.53,ffwp=172.20.0.53,ffw=172.20.0.53,20.172.in-addr.arpa=172.20.0.53,22.172.in-addr.arpa=172.20.0.53,23.172.in-addr.arpa=172.20.0.53,31.172.in-addr.arpa=172.20.0.53,c.f.ip6.arpa=172.20.0.53

MaraDNS

Put this in your mararc:

ipv4_alias["dn42_root"] = "172.20.0.53"
root_servers["dn42."] = "dn42_root"
root_servers["20.172.in-addr.arpa."] = "dn42_root"
root_servers["22.172.in-addr.arpa."] = "dn42_root"
root_servers["23.172.in-addr.arpa."] = "dn42_root"

Unbound

Make sure DNSSEC is disabled (auto-trust-anchor-file is not set):

server:
      domain-insecure: "dn42"
      domain-insecure: "20.172.in-addr.arpa"
      domain-insecure: "21.172.in-addr.arpa"
      domain-insecure: "22.172.in-addr.arpa"
      domain-insecure: "23.172.in-addr.arpa"
      domain-insecure: "d.f.ip6.arpa"
      local-zone: "20.172.in-addr.arpa." nodefault
      local-zone: "21.172.in-addr.arpa." nodefault
      local-zone: "22.172.in-addr.arpa." nodefault
      local-zone: "23.172.in-addr.arpa." nodefault
      local-zone: "d.f.ip6.arpa." nodefault

forward-zone: 
      name: "dn42"
      forward-addr: fd42:d42:d42:54::1
      forward-addr: 172.20.0.53

forward-zone: 
      name: "20.172.in-addr.arpa"
      forward-addr: fd42:d42:d42:54::1
      forward-addr: 172.20.0.53

forward-zone: 
      name: "21.172.in-addr.arpa"
      forward-addr: fd42:d42:d42:54::1
      forward-addr: 172.20.0.53

forward-zone: 
      name: "22.172.in-addr.arpa"
      forward-addr: fd42:d42:d42:54::1
      forward-addr: 172.20.0.53

forward-zone: 
      name: "23.172.in-addr.arpa"
      forward-addr: fd42:d42:d42:54::1
      forward-addr: 172.20.0.53

forward-zone:
      name: "d.f.ip6.arpa"
      forward-addr: fd42:d42:d42:54::1
      forward-addr: 172.20.0.53

JunOS (SRX 12.1X46)

Should also work in 12.1X44 and 12.1X45. After making the changes below you may need to run:

restart named-service

Config (vlan.0 is presumed to be your LAN/Trust interface)

system {
   services {
      dns {
         dns-proxy {
            interface {
               vlan.0;
            }
        default-domain dn42 {
           forwarders {
              172.20.0.53;
	      fd42:d42:d42:54::1;
           }
        }
        default-domain 20.172.in-addr.arpa {
               forwarders {
                  172.20.0.53;
		  fd42:d42:d42:54::1;
               }
            }
        default-domain 22.172.in-addr.arpa {
               forwarders {
                  172.20.0.53;
		  fd42:d42:d42:54::1;
               }
            }
            default-domain 23.172.in-addr.arpa {
               forwarders {
                  172.20.0.53;
                  fd42:d42:d42:54::1;
               }
            }
         }
      }
   }
}

MS DNS

Add a "Conditional Forward" (de: "Bedingte Weiterleitung") for each of "dn42", "20.172.in-addr.arpa", "22.172.in-addr.arpa", "23.172.in-addr.arpa" using 172.20.0.53 as forwarder. Ignore the error message that the server is not authoritative.